Mopar Dash Vents — 1968–74 Dodge & Plymouth
1970–74 Challenger & 'Cuda · 1968–70 B-Body
Replace the Cracked Dash Vents in Your Mopar
Rated 4.9 out of 5 (28 E-body dash trim reviews)Complete 3-vent set $424.99, or by the piece from $49.99
Add Complete Set to CartOEM-style fit. UV-resistant ASA, hand-assembled in the USA. No core required.
Free shipping over $99·Free returns on undamaged, unmodified parts (policy)·Made in the USA
1970–74 E-Body · Challenger & 'Cuda
Full set, a combo, or the single piece your dash is missing.
Complete Dash Vent Set
All three positions: driver, center and passenger. Arrives assembled, so the whole dash is done in one order.
$438.98 if bought separately (Driver vent + center combo + passenger combo). You save $13.99.
Center + Passenger Combo
Both A/C-side vents, hand-assembled with stainless hardware. Your driver's side stays original.
$358.99 if bought separately (Center combo + passenger combo). You save $9.00.
Center Dash Vent Combo
The big center A/C vent, assembled. Replaces the cracked or missing one in the middle of the dash.
Passenger Vent Combo
Housing and louver assembled. Replaces a cracked or missing passenger vent.
Driver's Vent
Finishes the driver's side. Stainless hardware included. Pairs with the dimmer or washer knob below.
A/C Baffle
OEM-style fit and look, printed in ASA. No core needed, so you keep your original.
Vent Cover Plates
No A/C? A clean pair of block-off plates, paintable. Pairs with the driver's A/C panel blank below.
Dash Vent Housings
Just the housing, for reusing your original louver. Choose passenger or center on the listing.
Photos From Customers
Shared by buyers through our Loox reviews.
1968–70 B-Body · Charger, GTX & More
Fits 1968–70 Plymouth GTX, Road Runner, Satellite and Dodge Charger, Coronet, Super Bee.
Rated 4.6 out of 5 (7 B-body vent combo reviews)
B-Body Dash Vent Combo
Complete vent, assembled with roll pins like factory. Ready to go in the dash.
Louver Only
Replaces a broken or brittle louver without hunting the swap meets for a used one.
Housing Only
Just the housing. Lets you keep running your original louver.
What Owners Say
Rated 4.9 out of 5 (28 E-body dash trim reviews, 25 verified buyers)
“We ordered the center HVAC vent to replace our broken vent and the fitment is just like the original. Highly recommend as a replacement to a hard to find part.”
“Perfect fit! Nice and smooth vent actuation, very happy with the purchase.”
“Got the product quick, and they fit excellent compared to the factory originals.”
“I have been looking for a center a/c for 4 years. Thanks for giving mopar parts some love”
“Top quality product. Seller did a great job and communication was second to none. Great price for a reproduction of an impossible part to find.”
“Great piece, great service, absolutely could not have finished our customer's dash without this vent and it was perfect! Great job!”
Finish the Rest of the Dash
More E-body dash trim from the same shop.
A/C Control Panel Trim
Raw plastic shown. Matte black option on the listing.
Driver's A/C Panel Blank
For non-A/C, non-heat cars. Pairs with the vent cover plates.
Radio Trim Panel
Textured raw plastic shown. Ribbed and black options on the listing.
Radio Blank Panel
Fills the radio opening for a clean, delete-style dash.
Center Speaker Cover
Open version shown. Blank and 'Cuda versions on the listing.
Speaker Grille
Left or right side, open. A blank version is on the listing.
Dimmer or Washer Knob
Dimmer (yellow) adds here. Washer (blue) on the listing.
What You're Actually Buying
The same spec applies to every vent on this page.
| Material | ASA, the same class of material used for exterior automotive trim. |
| UV resistance | UV-resistant ASA, chosen to hold up under the windshield better than 50-year-old factory plastic. |
| Fitment | OEM-style fit. Modeled from original parts to fit the factory dash openings. E-body: 1970–74 Dodge Challenger and Plymouth Barracuda. B-body: 1968–70 GTX, Road Runner, Satellite, Charger, Coronet and Super Bee. |
| Assembly | Combos and sets arrive hand-assembled with roll pins like factory. |
| Hardware | Stainless steel hardware included where the factory used it. |
| Core charge | None. Keep your originals. |
| Finish | Uniform factory-style texture. Run as-is or paint with standard plastic prep and automotive paint. |
| Built | Hand-assembled in the USA, in small batches. |
| Shipping | Free shipping on orders over $99. Shipping policy |
| Returns | Free returns on undamaged, unmodified product. Refund policy |
Made in Small Batches, Hand-Assembled
These are made and assembled in the USA in small runs. If a piece shows sold out, it is on the next batch — the product page has the details.
Common Questions
Will these fit my car?
They are an OEM-style fit: modeled from original parts to fit the factory dash openings. E-body parts fit 1970–74 Dodge Challenger and Plymouth Barracuda; B-body parts fit 1968–70 GTX, Road Runner, Satellite, Charger, Coronet and Super Bee.
What are they made of? Will they hold up in the sun?
UV-resistant ASA, the same class of material used for exterior automotive trim, chosen to hold up under the windshield better than 50-year-old factory plastic.
Can I paint them to match my interior?
Yes. They have a uniform factory-style texture and take paint like OEM plastic: normal plastic prep, then automotive paint. Or run them as-is.
Do combos come assembled?
Yes. Combos and sets arrive hand-assembled with roll pins like factory. Stainless hardware is included where the factory used it.
I only need one piece. Do I have to buy the whole set?
No. Housings, louvers, single vents, cover plates and baffles are sold individually. If you need all three E-body vents, the Complete Set costs less than buying them separately.
My car has no A/C. What do I need?
The vent cover plates block off the vent openings, and the driver's A/C panel blank is made for non-A/C, non-heat cars. Both are on this page.
Is there a core charge?
No. No core is required on any part on this page. You keep your originals.
What does shipping cost?
Shipping is free on orders over $99. Full details are in the shipping policy.
What if it doesn't work out?
Free returns on undamaged, unmodified product. See the refund policy for how it works.
Are you affiliated with Mopar, Dodge or Plymouth?
No. iPrint3D is an independent shop. Brand and model names are used only to describe which cars these parts fit.
Finish Your Dash
Pick the pieces you need and quit hunting swap meets for brittle originals. UV-resistant ASA, made in the USA.
Shop Mopar Dash Vents