Snap-On Tool Truck Organization & Display
Tool Truck Organization That Stays Put
Holders and mounts sized to the Snap-on gear you already carry. Screw-mount, made in the USA, never out of stock — if we're short, we print yours and ship in 3–5 days.
Made in the USA·Free shipping over $99·Free returns
Complete Kits · One Box, One Price
The same holders, bundled the way they actually get ordered — and cheaper than buying them one at a time.
The Full Soap Wall
All three sizes in one box — dual 18oz, the 64oz jug holder and dual 84oz. Every soap on the truck, sorted.
New Truck Starter Set
Six pieces: all three soap holders, two torch holders and a snack holder. Pick your snack color.
Multi-Truck Pack
Twelve pieces — three complete soap walls plus three torch holders. For running more than one route.
Soap Holders · Fits Snap-on Hand Cleaner
Keep Black Cherry pump jugs secured, upright and display-ready — pick the size you stock.
Dual 84oz Soap Holder
Two 84oz bottles (#WOD2525ACSA) secured side by side for the big movers.
64oz Soap Holder
Holds a 64oz pump jug secured and upright — soap stays put, display-ready.
Dual 18oz Soap Holder
Two 18oz pump bottles (#WOD2518ACSA) side by side, locked in. Black or red.
Display & Merchandising
Put impulse buys at eye level instead of in a drawer.
Snack Holder
Two pockets for jerky and beef sticks, mounted up where customers see them. 8" wide.
Butane Torch Holder
Showcases three or five butane torches at once. Wall-mountable, black.
Door Caddy
Velcros onto the door and holds your phone, wallet or whatever rides up front.
14.4V & 7.2V Tool and Battery Mounts
Slide on, stays put until you need it. Angled wall version for display, flat version for inside the toolbox — $4.99 each.
Tool Mount · Wall
Angled to show the tool off on a wall or panel — ready to grab, ready to sell.
Tool Mount · Flat
Flat version that keeps tools organized inside a toolbox drawer or lid.
Battery Mount · Wall
Batteries slide on and stay put — no more rolling around a drawer.
Battery Mount · Flat
Flat version for toolbox drawers — every battery charged, organized and in its place.
What You're Actually Buying
The same spec applies to every holder and mount on this page.
| Fit | Each holder is sized to a specific piece of Snap-on gear — the 64oz Black Cherry pump jug, #WOD2518ACSA and #WOD2525ACSA bottles, and 14.4V / 7.2V tools and batteries. Snug fit, easy in and out. |
| Mounting | Multiple screw points on every holder. Drives into walls, shelving or your toolbox — no adhesive pads that let go in summer heat. Door caddy attaches with Velcro. |
| Material | Precision 3D-printed in durable material made to handle the bumps, heat and daily abuse of a working route truck. |
| Colors | Black. Snack holder and dual 18oz soap holder also come in red. |
| Kits | The kits at the top of the page are the same holders sold together at a lower price. Nothing is different about the parts — you just get the whole wall in one order. |
| Built | Made in the USA, in small batches. |
| Shipping | In-stock items ship fast. If a piece sells out you can still order it — we print it and ship in 3–5 business days, and email you first if it will take longer. Door caddy is always made to order. Free shipping over $99. |
| Returns | Free returns on any undamaged, unmodified product. |
| Compatibility | iPrint3D Company is not affiliated with or endorsed by Snap-on Incorporated. Product names indicate compatibility only. |
Nothing Rolls, Nothing Rattles, Everything Sells
Every pothole shuffles your truck. These holders keep product upright, tools ready, and displays looking sharp between every stop.
Locked In on the Move
Jugs, bottles, tools and batteries stay secured while you drive — no more soap on its side or batteries rolling in a drawer.
Sized for Snap-on
Modeled around the exact jugs, bottles, tools and batteries you carry — snug fit, easy in and out.
Display That Moves Product
Eye-level merchandising for soap, snacks and torches turns dead wall space into impulse sales.
Simple Screw Mount
Multiple screw points — mount to walls, shelving or your toolbox in minutes and it stays there.
Outfit the Whole Truck in One Order
Soap secured, snacks displayed, torches showcased, tools and batteries mounted. The kits bundle the pieces that get ordered together — one box, one price, and less than buying them separately.
Common Questions
Will these fit my Snap-on soap jugs and bottles?
Yes — each holder is sized to a specific container: the 64oz holder fits the 64oz Black Cherry pump jug, the dual 18oz fits two #WOD2518ACSA pump bottles, and the dual 84oz fits two #WOD2525ACSA bottles.
Is the kit cheaper than buying the holders separately?
Yes. The Full Soap Wall saves $9.98 over the three holders bought one at a time, the New Truck Starter Set saves $16.96, and the Multi-Truck Pack saves $35.89. Same parts, same shipping — just one order instead of several.
How do they mount to the truck?
Every holder has multiple screw points. Drive screws into your wall, shelving or toolbox and it's on there for good — no adhesive pads that let go in summer heat. The door caddy is the exception: it Velcros on so you can pull it off when you need to.
What's the difference between the Wall and Flat mounts?
The Wall (Angled) version tilts the tool or battery toward the aisle for display and quick grabs. The Flat (Toolbox) version sits flush for mounting inside drawers or on flat surfaces.
3-torch or 5-torch holder?
Same holder, different width. If you carry more than three butane torches on the truck, get the 5 — it keeps the whole line together in one spot instead of two.
What if something is out of stock?
Order it anyway. These are printed in small batches, so if we're short we run yours and ship in 3–5 business days. If it's going to take longer than that, we'll email you before it ships, not after.
What are they made of?
Precision 3D-printed in durable material made to handle the bumps, heat and daily abuse of a working route truck.
Do you make custom holders?
We regularly build new holders for the tool truck world — if there's a product you want secured or displayed, reach out through our contact page.
Get Your Truck Squared Away
Holders and mounts made to fit the gear you already carry — buy them one at a time, or take the whole wall in a kit and pay less for it.
Shop the KitsiPrint3D Company is not affiliated with or endorsed by Snap-on Incorporated. Product names are used solely to indicate compatibility.